Access Matting
Other Products
GeoGrid®
GeoGrid® is a simple to install cellular paving system that is a highly effective way of stabilising and reinforcing uneven ground. It’s unique, patented design provides exceptional strength and weight load capability while it’s grids means rain and flood water drains off the surface.
Ideal for integration with Sustainable Urban Drainage Systems (SUDS) and for use in areas that are prone to flooding or standing water in hot or cold climates, its simple interlocking design allows for fast and efficient installation and removal. It can also be pre-connected into 1m2 sections or cut into shapes to fit around obstacles. The GeoGrid® paving system is suitable for use in:
- Pathways, pedestrian access paths and driveways
- Overflow, event and new car parks
- Ground reinforcement and stabilisation, such as slopes, embankments and storage areas.
Integrated into SUDS - Access roads, roadways and gateway areas
- Road extensions and widening projects
- Equestrian and outdoor events
- Emergency and fire exit routes
- Infiltration basins
- Depot storage areas
- Golf buggy routes and helicopter landing pads
Why Choose GeoGrid®?
- A quick and easy way to stablise and reinforce uneven/sloping ground
- Disperses water, making it ideal for areas prone to flooding
- Integration with Sustainable Urban Drainage Systems (SUDS)
- Patented design combines exceptional cellular strength with excellent weight load capability
- Allows for expansion and contraction to avoid surface deformation in hot or cold climates
- Fast and efficient installation with a simple interlocking design
- Manufactured from 100% recycled polyethylene in the UK and Europe
- Can be pre-connected and cut into shapes to fit around obstacles
- Option of hi-vis or white demarcation blocks to indicate zones, such as parking bays, and for easier detection at night
GeoGrid® Standard is able to withstand weight loads up to 400 tonnes per m2, with a point load weight of 25 tonnes, making it suitable for pedestrian and light vehicle use.
GeoGrid® Premium incorporates metal connectors and can tolerate 500 tonnes per m2 and a point load weight of 35 tonnes, ideal where heavier vehicles and traffic is expected.
Both systems can be in-filled with aggregate or decorative stones for a robust surface, or earth and then seeded to create an environmentally-friendly, aesthetic surface.
For more detailed information on GeoGrid® Standard or GeoGrid® Premium cellular paving systems, its uses as well as product, health and safety, download our brochure here.
Get your personalised quote today by contacting our customer service team via our form, email or pick up the phone.
Get In Touch TODAY FOR A FREE QUOTE
Our friendly team are here to help you find the best solution for your needs.
Whether it’s for long term projects, short term hire or to purchase, we’ve got you covered.
EconoMatMB®
The EconoMatMB® is designed as a robust yet lightweight outdoor mat and is a great alternative to more traditional plywood mats. They are made from 100% recycled LDPE (low density polyethylene) and feature a 4-bar tread to provide the maximum traction for vehicles. Able to withstand loads of up to 15 tonnes (depending on ground conditions), they are a tough multi-use board that is long-lasting and prevent slippage, falls and splinters.
Ideal for use at events and construction sites as light duty matting for lighter weight vehicles and pedestrians, it is extremely weatherproof as well as being resistant to splintering or breakage. Because each mat weighs just 32kg, it is easy to handle and install, making a good temporary access or ground protection in creating walkways, car parks, event flooring and access routes. The EconoMatMB® is suitable for use in:
- Pathways, pedestrian access paths and driveways
- Overflow, event and new car parks
- Ground reinforcement and stabilisation, such as slopes, embankments and storage areas.
Integrated into SUDS - Access roads, roadways and gateway areas
- Road extensions and widening projects
- Equestrian and outdoor events
- Emergency and fire exit routes
- Construction, landscaping, utilities and maintenance projects
Why Choose EconoMatMB®?
- Quickly adapts and moulds to uneven/sloping ground due to its flexibility
- Fast and efficient installation with a simple interlocking design
- Manufactured from 100% recycled polyethylene in the UK
- 4-bar tread surface provides maximum traction to avoid slippage
- Meets relevant health and safety regulations
- Lightweight, weighing just 32kg, for easy installation and removal
- Able to withstand loads of up to 15 tonnes (dependent on ground conditions)
- Weatherproof and can be used in all weather conditions
- Different connector options available
Connection Options
- 2 or 4-way urethane connectors, inserted from below and attached via M10 bolts. Can be strengthened with a metal strap where heavy vehicles or equipment is being used, or the matting is sited on an incline/slope.
- Fast fit connectors that push through holes and beneath the mats. Ideal for short-term projects where installation and removal needs to be quick and efficient.
- Flex connectors fitted in the same way as fast fit connectors but used where there is a high degree of uneven/undulating ground to allow the mats to flex.
- Metal U-pin connectors to be used with other connectors where EuroMat® matting is installed on inclines or slopes.
For more detailed information on EconoMatMB® outdoor mats, its uses as well as product, health and safety, download our brochure here.
Get your personalised quote today by contacting our customer service team via our form, email or pick up the phone.
CALL TODAY FOR A FREE QUOTE
Our friendly team are here to help you find the best temporary access mat solution for your needs.
Whether it’s for long term projects, short term hire or to purchase, we’ve got you covered.
Outrigger Pads
Outrigger pads are designed to provide support for cranes, aerial work platforms and other types of mobile plant to deliver stability and security, especially if they are being operated on unstable ground, like construction sites. They can also be used for caravans, RV and camper vans, and motor homes when there is a need to level and stabilise the legs on soft ground, gravel and grass.
A good alternative to more conventional types of wood and steel outrigger pads, they are manufactured from a highly durable, robust polyethylene. Our outrigger pads are also oil and chemical resistant, they don’t splinter or disintegrate over time and don’t absorb water. Easy to store, handle and install, the pads adapt to the ground beneath the legs of heavy plant or vehicles. They are suitable for use with:
- All types of crane outriggers
- Hiab outrigger support
- Cherry pickers to provide stability
- Scaffolding supports
- Skip deployment and support
- Static or mobile caravans, RV and camper vans and motor home support and stability
- Mobile building support and stability
Why Choose Outrigger Pads?
- Lightweight and with carry handles for easy installation and maneuverability
- Highly durable, robust, strong and long-lasting
- Resistant to oil and chemicals
- Won’t splinter, break or corrode under normal working conditions
- Highly resistant to vertical pressure
- Can be customised to shape, size, colour, including hi-vis and corporate branding
- Don’t absorb water and can be used in all weather conditions
- Wide range of sizes available, depending load and project requirements
- Quickly adapt to the ground for a safe working platform, and returns to original shape after use
Outrigger Pads Specifications
Outrigger pads are essential for complying with the latest health and safe regulations associated with the operating or heavy plant, cranes, lifting equipment and aerial platforms. They deliver the ideal cushioned support and stability needed, are designed to handle heavy weight loads and prevent ground damage.
They are available in square or round formats, which can then be adapted for use, such as size and shape. Outrigger pads are also available in hi-vis and can be branded to promote your corporate branding. The most popular sizes are:
Square outrigger pads
400mm x 400mm x 40mm (6.1kg per pad)
500mm x 400mm x 50mm (11.9kg per pad)
600mm x 600mm x 60mm (17.1kg per pad)
Round outrigger pads
1000mm diameter x 40mm (29.8kg per pad)
1200mm diameter x 60mm (64.5kg per pad)
1200mm diameter x 80mm (86kg per pad).
For more detailed information about our outrigger pads for sale or hire, as well as product, health and safety, download our brochure here.
Get your personalised quote today by contacting our customer service team via our form, email or pick up the phone.
CALL TODAY FOR A FREE QUOTE
Our friendly team are here to help you find the best temporary access mat solution for your needs.
Whether it’s for long term projects, short term hire or to purchase, we’ve got you covered.